Over dit product
Ultimaker CPE 750 g Dark Gray
Ultimaker CPE is a co-polyester filament for complex technical prints, functional prototypes, models, mechanical parts and short run manufacturing. The material combines chemical resistance, toughness, dimensional stability, reasonable stiffness, high strength and high impact resistance.
CPE and CPE+ have similar performance characteristics. CPE+ additionally offers higher temperature resistance and higher impact resistance.
Excellent chemical resistance
Excellent toughness and dimensional stability
Good interlayer adhesion, especially when using the front door add-on
Low levels of ultrafine particles (UFPs) and volatile organic compounds (VOCs)
Suitable for functional prototypes and short run manufacturing
Transparent option available within the CPE family
Suitable for bridging large gaps
CPE should be printed at higher temperatures, between 230°C and 250°C, to achieve good results. Ultimaker therefore supplies an extra PTFE Coupler with every spool of CPE.
Thanks to the material profiles in Cura for the Ultimaker 2+, printing parts and prototypes with CPE is easy and reliable.
Specificaties
Specificaties
| Merk | UltiMaker |
| Materiaalsoort | Technisch filament |
| Technologie | FDM |
Filament: droog bewaren, met het juiste profiel.
Filament neemt vocht op; een droge opslag of een droogkast houdt de kwaliteit op peil. Het materiaalprofiel van de fabrikant zorgt dat de eerste print goed is.
- Materiaaladvies bij de toepassing
- Veiligheidsbladen en datasheets op aanvraag
- Afname per stuk of in series
Past dit bij uw toepassing?
Vertel wat het onderdeel moet doen: de belasting, de maatvoering, de serie en de doorlooptijd. Wij zeggen of dit de juiste keuze is, en anders welke wel.
