Over dit product
Cleaner air while you print
The VOC Extractor is a compact add-on that reduces volatile organic compound (VOC) levels while your printer runs. Air passes through a pre-filter and then two activated carbon HEPA filters. Each filter lasts roughly 330 hours of print time and is replaced in seconds.
With the VOC Extractor, Alpha Resins on Form Studio 1 are UL GREENGUARD Gold certified for low chemical emissions. The extractor also works on Form 4 for better air quality.
Roughly 330 print hours per filter
7, 12 and 19 CFM to match your hose routing and materials.
Runs only while printing
Vents filtered air out of the unit.
UL GREENGUARD Gold certified when Alpha Resins are printed on Form Studio 1 with the VOC Extractor.
Compatible with Form Studio 1, Form 4
Filtration Pre-filter + 2 activated carbon HEPA filters
Filter life Roughly 330 print hours per filter
Airflow 7, 12 or 19 CFM
Shipping dimensions 26.2 x 16.7 x 22.5 cm
Specificaties
Specificaties
| Merk | Formlabs |
| Technologie | SLA |
Past dit bij uw toepassing?
Vertel wat het onderdeel moet doen: de belasting, de maatvoering, de serie en de doorlooptijd. Wij zeggen of dit de juiste keuze is, en anders welke wel.
