Over dit product
3DLAC adhesive spray is developed for 3D printers with a heated print bed. The spray dries within seconds, improves first-layer adhesion and helps prevent warping, shifting and lifting during printing.
Ultra-fast drying: dries within seconds, so you can start printing without delay.
Excellent adhesion: keeps the first layer firmly attached to the print bed and helps prevent unwanted shifting.
Long service life: one 400 ml can is sufficient for more than 400 applications.
Easy to apply and clean: a light spray or thin layer is sufficient; residue can be cleaned easily with water.
Anti-warping effect: suitable for materials such as ABS, PLA, PETG and other filaments, helping to prevent deformation and lifting during printing.
Compatible with multiple surfaces: works on glass, mirrors, aluminium and other smooth surfaces.
Shake the can well and apply a thin layer to a clean, dry surface before printing. Use the spray in a well-ventilated area and avoid contact with electronic devices. After printing, let the printed object cool down so it can be removed easily and without damage.
Cost-saving: replaces Kapton tape and other adhesion aids.
Stable prints: helps keep the print in place from the first layer.
Spanish development: developed by 3D printing specialists in collaboration with specialized laboratories.
Shake well before use.
Apply a thin layer for the best result.
After use, hold the aerosol can upside down to purge the valve.
Past dit bij uw toepassing?
Vertel wat het onderdeel moet doen: de belasting, de maatvoering, de serie en de doorlooptijd. Wij zeggen of dit de juiste keuze is, en anders welke wel.
