Over dit product
Magigoo PP-GF is designed to work exclusively with glass-reinforced polypropylene filaments. This adhesive is for professional use; it ensures that prints remain firmly attached when the print bed is hot and that the parts can be easily removed once it has cooled down. This unique and innovative mechanism means that no tools are needed to remove the prints from the bed. They simply pop off as the bed cools down.
Glass-reinforced polypropylene acts as a thermally activated interfacial layer, enabling better interactions, both at micro and molecular level, between the print bed & materials. In general, it is recommended to print at the temperatures recommended by the filament supplier. The printing conditions vary from one printer to another.
To find the best temperature, it is best to start at the lower end of the recommended settings and increase the bed temperature in steps of 5°C. This should be done with standardized calibration prints.
An additional advantage of Magigoo glass-reinforced polypropylene, which is thermally activated, is that the print releases when cooling. Again, different printers, print surfaces or filaments will have slightly different release conditions, but as a general rule, a reduction of 30 - 40°C should be sufficient to remove your prints without any effort.
The best and most reliable performance is achieved when it is applied in a thin layer. This means that cleaning and reapplying between prints is recommended, especially on longer prints or more difficult-to-print material.
Technical data sheet & safety instructions & Magigoo Manual
How do I use Magigoo PP-GF?
Past dit bij uw toepassing?
Vertel wat het onderdeel moet doen: de belasting, de maatvoering, de serie en de doorlooptijd. Wij zeggen of dit de juiste keuze is, en anders welke wel.
