Over dit product
Alpha Resin for Form Studio 1
Alpha Fast Resin is a fast-printing general purpose resin with print speeds up to 130 mm/h: small components in minutes, or the entire Form Studio 1 build volume in less than two hours.
Build prototypes faster or create jigs, fixtures and tooling with 46 MPa tensile strength and 34% elongation at break, exceeding the strength and toughness of comparable ABS-like resins. Print settings are tested and validated by Formlabs, so speed does not come at the expense of print success.
The entire build volume in under two hours.
46 MPa tensile strength
34% elongation at break for functional tools.
Printed parts meet ISO 10993 for long-term skin contact (>30 days) when post-processed per Formlabs guidelines.
UL GREENGUARD Gold certified when Alpha Resins are printed on Form Studio 1 with the VOC Extractor.
Fast iterative prototypes
Jigs, fixtures and tooling
For Form Studio 1 only, with the standard Form Studio 1 Resin Tank. Not compatible with Form 4/4B or Form 4L/4BL.
Ultimate tensile strength 46 MPa
Elongation at break 34%
Print speed Up to 130 mm/h (250 micron)
Specificaties
Specificaties
| Merk | Formlabs |
| Technologie | SLA |
| Materiaalsoort | Resin (SLA) |
De SLA-machines van Formlabs.
Resin: koel, donker en in de cartridge.
Bewaar resin bij kamertemperatuur, uit het licht, en schud de cartridge voor gebruik. Na het printen: wassen, nabelichten, en pas dan de supports eraf. Wij laten het zien in de showroom.
- Materiaaladvies bij de toepassing
- Veiligheidsbladen en datasheets op aanvraag
- Afname per stuk of in series
Past dit bij uw toepassing?
Vertel wat het onderdeel moet doen: de belasting, de maatvoering, de serie en de doorlooptijd. Wij zeggen of dit de juiste keuze is, en anders welke wel.
