Over dit product
Industrial Nylon 612 CF copolymer
UltiMaker Nylon CF Slide is a Nylon 612 CF copolymer for industrial applications where wear resistance and low friction are important. This PFAS-free filament offers high wear resistance, temperature resistance up to 180°C after annealing, and Z tensile strength exceeding 40 MPa. It is intended as a replacement for POM in complex, custom designs.
Nylon CF Slide material properties
Coefficient of friction
180°C (HDT B, annealed)
Nylon CF Slide applications
Low friction and wear resistance against steel.
UltiMaker Nylon CF Slide is suitable as an alternative to POM, with low friction and high wear resistance against stainless steel. Its printability, PFAS-free formulation and performance make the material suitable for 3D printed production parts used over long periods.
A balanced composite material
This filament combines strength and stiffness with good layer bonding and impact resistance for demanding, durable applications. The Nylon 6,12 base balances mechanical properties, moisture uptake and printability.
The matte, consistent surface finish of UltiMaker Nylon CF Slide is suitable for end-use parts. Parts that move, slide or rub under load can benefit from this tribological material for higher efficiency and longer component life.
Printer compatibility S7;S5;S3;Factor 4;S8
Print Core compatibility Print core CC 0.4 mm;Print core CC 0.6 mm;HT Print Core 0.6 mm
Specificaties
Specificaties
| Merk | UltiMaker |
| Materiaalsoort | Nylon (PA) |
| Technologie | FDM |
Filament: droog bewaren, met het juiste profiel.
Filament neemt vocht op; een droge opslag of een droogkast houdt de kwaliteit op peil. Het materiaalprofiel van de fabrikant zorgt dat de eerste print goed is.
- Materiaaladvies bij de toepassing
- Veiligheidsbladen en datasheets op aanvraag
- Afname per stuk of in series
Past dit bij uw toepassing?
Vertel wat het onderdeel moet doen: de belasting, de maatvoering, de serie en de doorlooptijd. Wij zeggen of dit de juiste keuze is, en anders welke wel.
