Over dit product
Lay3rs | PLA Filament
PLA filament built from five food-safe ingredients
Bambu Lab PLA Pure is built from just five ingredients: PLA, an acrylic copolymer, colour pigments, EBS and talc. Every ingredient, pigments included, is individually tested and certified to the European food-contact standard EU 10/2011, as confirmed in the EU Food Contact certificate and the technical data sheet . The talc is independently verified asbestos-free, and the filament passes the European toy safety standard EN 71-3, see the EU Toy Safety certificate .
PLA Pure is also UL 2904 GREENGUARD certified: particulate and VOC emissions during printing are lower than comparable filament, tested on an open Bambu Lab printer without an enclosure or filtration. Mechanically it matches PLA Basic, with less stringing and a cleaner finish straight off the spool.
5 certified ingredients
Every ingredient, pigments included, individually tested to EU 10/2011.
UL 2904 GREENGUARD certified
Lower particulate and VOC emissions while printing, safe for the living room.
EN 71-3 toy safety tested
Passes the European migration limit for heavy metals in toys.
75 MPa bending strength (X-Y)
Mechanically matches PLA Basic, no compromise on durability.
Less stringing, no pre-drying needed
Clean finish straight off the spool, with less post-processing.
Specificaties
Specificaties
| Merk | Bambu Lab |
| Technologie | FDM |
| Materiaalsoort | PLA |
Filament: droog bewaren, met het juiste profiel.
Filament neemt vocht op; een droge opslag of een droogkast houdt de kwaliteit op peil. Het materiaalprofiel van de fabrikant zorgt dat de eerste print goed is.
- Materiaaladvies bij de toepassing
- Veiligheidsbladen en datasheets op aanvraag
- Afname per stuk of in series
Past dit bij uw toepassing?
Vertel wat het onderdeel moet doen: de belasting, de maatvoering, de serie en de doorlooptijd. Wij zeggen of dit de juiste keuze is, en anders welke wel.
