Over dit product
Support PLA/PETG is support material for use with PLA and PETG filament. It is designed for tool-free removal and to preserve the surface of the printed object as much as possible.
Easy tool-free removal
Support PLA/PETG is formulated to minimize fusion with PLA and PETG through differences in polarity. This helps with removal of the support interface and reduces the risk of damage to the printed object.
Smooth support interface
Support PLA/PETG provides a smooth surface quality at the contact area and supports fine details. With zero top interface spacing and Z distance, the support material provides an accurate interface for complex prints.
Support PLA/PETG is designed for use with both PLA and PETG, so you do not have to switch support materials. This saves time and simplifies the workflow.
Recommended for use with PLA or PETG filament only. Select "Support for PLA/PETG" in the "Support/Raft Interface" setting in your slicer.
When using tree supports, do not use support filament for the "Support/raft base".
Store the filament in a dry location. Dry it at 75°C for 8 hours if brittle or exposed to moisture. See the WIKI filament drying guide: filament drying instructions .
For more support-related settings, refer to the WIKI page: Support .
Specificaties
Specificaties
| Merk | Bambu Lab |
| Technologie | FDM |
| Materiaalsoort | PETG |
Filament: droog bewaren, met het juiste profiel.
Filament neemt vocht op; een droge opslag of een droogkast houdt de kwaliteit op peil. Het materiaalprofiel van de fabrikant zorgt dat de eerste print goed is.
- Materiaaladvies bij de toepassing
- Veiligheidsbladen en datasheets op aanvraag
- Afname per stuk of in series
Past dit bij uw toepassing?
Vertel wat het onderdeel moet doen: de belasting, de maatvoering, de serie en de doorlooptijd. Wij zeggen of dit de juiste keuze is, en anders welke wel.
