Over dit product
Ultimaker CPE 750 g Blue
CPE (co-polyester) is suitable for complex technical prints, functional prototypes, models, mechanical parts and short production runs. The material combines reasonable stiffness, high strength, high impact resistance, toughness, chemical resistance and good dimensional stability.
CPE is also suitable for bridging large gaps. Print CPE at higher temperatures, between 230 °C and 250 °C, for good results. Ultimaker therefore includes an extra PTFE Coupler with every spool of CPE.
Material properties and application
Toughness and good dimensional stability
Good interlayer adhesion, especially when using the front door add-on
Low levels of ultrafine particles (UFPs) and volatile organic compounds (VOCs)
Suitable for functional prototypes, models, mechanical parts and short production runs
Transparent option available within the CPE family
CPE and CPE+ provide similar performance characteristics. CPE+ also provides higher temperature resistance and increased impact strength.
Thanks to Cura material profiles for Ultimaker 2+, printing parts and prototypes is easier and more reliable.
Specificaties
Specificaties
| Merk | UltiMaker |
| Materiaalsoort | Technisch filament |
| Technologie | FDM |
Filament: droog bewaren, met het juiste profiel.
Filament neemt vocht op; een droge opslag of een droogkast houdt de kwaliteit op peil. Het materiaalprofiel van de fabrikant zorgt dat de eerste print goed is.
- Materiaaladvies bij de toepassing
- Veiligheidsbladen en datasheets op aanvraag
- Afname per stuk of in series
Past dit bij uw toepassing?
Vertel wat het onderdeel moet doen: de belasting, de maatvoering, de serie en de doorlooptijd. Wij zeggen of dit de juiste keuze is, en anders welke wel.
