Over dit product
CPE, co-polyester, is an Ultimaker material type for functional prototypes, models, mechanical parts and short runs. The material is suitable for complex technical prints due to its reasonable stiffness, high strength and high impact resistance.
CPE is chemically resistant, tough and dimensionally stable. The material is also suitable for bridging large openings. For good results, CPE is printed at higher temperatures, between 230°C and 250°C. Ultimaker therefore includes an extra PTFE Coupler with every spool of CPE.
Good chemical resistance
Good toughness and dimensional stability
Good interlayer adhesion, especially when using the front door add-on
Low levels of ultrafine particles (UFPs) and volatile organic compounds (VOCs)
Suitable for short runs and functional prototypes
Transparent option available within the CPE range
CPE and CPE+ have similar performance characteristics. CPE+ also offers higher temperature resistance and higher impact strength.
Thanks to the new material profiles in Cura for the Ultimaker 2+, printing parts and prototypes is easier and more reliable.
Specificaties
Specificaties
| Merk | UltiMaker |
| Materiaalsoort | Technisch filament |
| Technologie | FDM |
Filament: droog bewaren, met het juiste profiel.
Filament neemt vocht op; een droge opslag of een droogkast houdt de kwaliteit op peil. Het materiaalprofiel van de fabrikant zorgt dat de eerste print goed is.
- Materiaaladvies bij de toepassing
- Veiligheidsbladen en datasheets op aanvraag
- Afname per stuk of in series
Past dit bij uw toepassing?
Vertel wat het onderdeel moet doen: de belasting, de maatvoering, de serie en de doorlooptijd. Wij zeggen of dit de juiste keuze is, en anders welke wel.
