Over dit product
Ultimaker CPE 750 g Light Gray
CPE, co-polyester, is an Ultimaker material for technical prints, functional prototypes, models and mechanical parts. The material is chemical resistant, tough and dimensionally stable.
CPE is suitable for complex prints due to its reasonable stiffness, high strength and high impact resistance. The material is also suitable for bridging large gaps.
Tough and dimensionally stable
High impact resistance
Good interlayer adhesion, especially when using the front door add-on
Low levels of ultrafine particles, UFPs, and volatile organic compounds, VOCs
Suitable for short production runs and functional prototypes
Transparent option available within the CPE family
Print temperature: 230 °C to 250 °C
Ultimaker includes an extra PTFE Coupler with every spool of CPE because of the higher printing temperatures.
With the material profiles in Cura for Ultimaker 2+, CPE can be printed with the intended settings.
CPE and CPE+ have similar performance characteristics. CPE+ additionally offers higher temperature resistance and higher impact strength.
Specificaties
Specificaties
| Merk | UltiMaker |
| Materiaalsoort | Technisch filament |
| Technologie | FDM |
Filament: droog bewaren, met het juiste profiel.
Filament neemt vocht op; een droge opslag of een droogkast houdt de kwaliteit op peil. Het materiaalprofiel van de fabrikant zorgt dat de eerste print goed is.
- Materiaaladvies bij de toepassing
- Veiligheidsbladen en datasheets op aanvraag
- Afname per stuk of in series
Past dit bij uw toepassing?
Vertel wat het onderdeel moet doen: de belasting, de maatvoering, de serie en de doorlooptijd. Wij zeggen of dit de juiste keuze is, en anders welke wel.
